Interior Emulsion

WALL KING INTERIOR EMULSION-Is a standard pure acrylic and co-polymer emulsion, with quality pigments and strong additives. Which gives Buttery smoothness, high coverage –rich matt looks..

SURFACE PREPARATION:

*Ensure surface is dry & free from dirt, old paint, algae and fungi. Removed all dust and clean with water, also make sure the surface is fully dry. Apply one coat of WALL KING INTERIOR PRIMER before apply WALL KING INTERIOR EMULSION and let it dry for 4 to 6 hours. For more smooth and level surfaces the use of WALL KING ACRYLICK PUTTY is highly recommended.

APPLICATION:

Apply first coat with recommended dilution and let it dry for at least 4 to 6 hours. Then apply second coat and allow it to dry over night.

CIRTIFICATION AS PER IS 15489.
SURFACE DRY WITH IN 30 Minutes
RE-COAT 4 to 6 hours
COVERAGE 100-120sq ft per coat by brush application.
PACK SIZE 500 ml, 1 lit, 4 lit, 10 lit, 20 lit.
RECOMMENDED SURFACE Masonry walls(interior),asbestos, brick work, concrete block ETC.
FINISH SMOOTH AND RICH MATT.
MIXING RATIO 500 ML.OF WATER PER 1 LTR.
BASIC FEATURES:

*ALKALI RESISTANT**GREAT HIDING**LOW VOC*. ATTRACTIVE HUGE COLOUR RANGE. **

NOTE:Moisture content should be below than 12% on the wall.Ph Value should be below than 11%.owner will be responsible if these are violated. Paint coverage depends on surface preparation, workmanship and weather condition. Do not apply paint on damp wall or white wash surfaces.for deep shade apply 1or 2 more coats.