WALL KING EXTERIOR EMULSION-Is a pure acrylic emulsion based product, having unique additives like anti- fading, anti-fungal properties. This product gives you a special looks to exterior walls with a three years life. Not recommended to salinity in weather.
*Ensure surface is dry & free from dirt, old paint, algae and fungi. Removed all dust and clean with water, also make sure the surface is fully dry. Apply one coat of WALL KING EXTERIOR PRIMER before apply WALL KING EXTERIOR EMULSION and let it dry for 6 to 7 hours.
Apply first finishing coat with recommended dilution and let it dry for at least 6 to 7 hours. Then apply second coat and allow it to dry over night.
| CIRTIFICATION | AS PER IS 15489:2004.read with IS: 101. |
|---|---|
| SURFACE DRY | WITH IN 30 Minutes |
| RE-COAT | 6 to 7 hours |
| COVERAGE | 100-120sq ft per coat by brush application. |
| PACK SIZE | 500 ml, 1 lit, 4 lit, 10 lit, 20 lit. |
| RECOMMENDED SURFACE | Masonry walls(exterior),asbestos, brick work, concrete block ETC. |
| FINISH | SMOOTH AND SLIGHT SHEEN. |
| MIXING RATIO | 500 ML.OF WATER PER 1 LTR. |
*ALKALI RESISTANT**GREAT HIDING**LOW VOC*. ATTRACTIVE HUGE COLOUR RANGE. **
NOTE: Moisture content should be below than 12% on the wall.Ph Value should be below than 11%.owner will be responsible if these are violated. Paint coverage depends on surface preparation, workmanship and weather condition.